QUICK START GUIDE
u-line.com
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press and the unit will immediately
switch on. To turn the unit off, press and release.
Initial startup requires no adjustments. See CONTROL
OPERATION section for more details.
U-Line recommends discarding the ice produced
during the first two to three hours of operation
to avoid possible dirt or scale that may dislodge
from the water line.
First Use
Ice
The Nugget Ice Machine produces cylindrical bits of
compressed ice approximately 3/4” x 1/2”.
Ice is produced until the machine senses the bin is full.
As ice slowly melts in the bin, the level of ice drops and
ice production resumes. This ensures a constant supply
of fresh ice is always available.
The factory default ice setting is 0, which produces
a firm and compact ice nugget. U-Line’s exclusive
U-Choose™ ice adjustability feature allows you five levels
of adjustment from 0 to -5. At -5 the ice is soft and
chewable.
To adjust the ice density:
1.
Hold for 5 seconds - display will flash current ice
setting
2. Adjust using or
3.
Confirm setting by pressing
Cleaning
17
NUGGET ICE MACHINE CLEANING CYCLE
This ice machine has an automatic clean alert function.
The control will indicate
CL
in the display, approximately
every six months with normal use, reminding you to
clean your unit. When
CL
is displayed, ice production will
continue. Depending on water conditions, more frequent
cleaning may be necessary. Cleaning removes lime scale,
other mineral deposits, and sanitizes the machine. Poor
ice quality and reduced ice output are signs that cleaning
is necessary. If the machine consistently requires more
frequent cleaning, consult a plumber to test the water
quality and recommend appropriate treatment.
Under normal conditions cleaning should be done
when the display shows
CL
. You may initiate
a cleaning cycle at any time by pressing and
holding the clean button for 10 seconds.
0 1
will
appear in the display indicating the start of the
cleaning process.
You may override
CL
in the display without cleaning by
pressing and holding the up, down, & light button for 10
seconds.
ICE
will scroll in the display and the cleaning
reminder (
CL
) will be reset for another approximate six
month cycle. Failure to clean may reduce the quality
and quantity of ice produced. Once the clean cycle
begins, it can be canceled by pressing three times.
Press once more to start making ice. The clean cycle
will automatically cancel if user fails to activate control at
steps 2, 3b, and 5b within 2 hours.
Required for cleaning:
• Hose and funnel - provided with unit
• Bucket and cleaning sponge
• Clean potable water
• SafeCLEAN Plus™ Cleaner
(Part No. ULANUGGETCLEAN) 1-8oz. bottle
included with unit
•
1 Water filter (if required)
Need more cleaner? Visit u-line.com