PAGE 3 OF 18
1021 IH-7562
4. Place door bracket onto side panels (at front of
table) and secure using six large Phillips head bolts.
Two bolts should be used on the outside and one
bolt on the inside of each side of the door bracket.
(See Figure 4)
5. Place tabletop onto legs, inserting legs into
tabletop gussets. With a 5/32
"
Allen wrench, tighten
set screw on each gusset. (See Figure 5)
6. Insert leg covers inside of cabinet, covering leg
and side panel. Fasten to leg and side panel with
six large Phillips head bolts per cover. Three bolts on
the inside and three on the outside. (See Figure 6)
Figure 5
ASSEMBLY CONTINUED
Figure 4
Figure 6
Inside
Outside
Door
Bracket
Outside
View
Inside
View
Holes
designate
front of table
Tabletop
Leg
Covers