PAGE 5 OF 15
0118 IH-7191
CUTTING BOARD REPLACEMENT CONTINUED
5. Two numbers are marked on cutting board: "1" on
one side and "2" on the other. Flip cutting board to
opposite side, as both sides may be used before
replacement. If both sides have been used, replace
cutting board. Then, tighten fixed plate, block plates,
bolts and nuts. (See Figure 19)
6. Pull safety pin out. (See Figure 20)
7. Put handle down. Re-install protective shield.
Replace and tighten all screws. (See Figure 21)
Figure 20
Safety Pin
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
Figure 21
Figure 19