PAGE 4 OF 27
0621 IH-3838
CARTRIDGE INSTALLATION CONTINUED
5. Remove the ties
holding the four
straps and let
them hang on
each side of the
waste reservoir.
(See Figure 11)
6. Compress the
waste reservoir
by pushing it
forward. Slide
all four straps
(two front and
two rear) into the
hooks, making
sure the straps are
not twisted. Visually inspect all four corners of the
bottom plate, making sure they are equal in height.
(See Figure 12)
WARNING! If waste reservoir is not properly
compressed, the unit will not function properly
on activation. Make sure the area underneath
the eyewash station is kept clear.
7. Make sure the
drain spout is
in its closed
(left) position.
(See Figure 13)
8. Move switch into
"ON" position.
Place front panel
back on unit and
close side panels.
(See Figure 14)
ARMING UNIT
1. Push the blue
button and hold
for 3 seconds
until a beep is
heard to disarm
the alarm.
(See Figure 15)
NOTE: To
prevent
tampering,
a wire tie can
be utilized to lock the side doors. (See Figure 15)
2. Open front door.
(See Figure 16)
3. Pull the headrest
toward you.
(See Figure 17)
4. Pull nozzle
from basin.
(See Figure 18)
INSTALLATION CONTINUED
Figure 13
1
2
3
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 11
Figure 12
Blue
Button
Wire Tie
Location
