Installation
1. Inclusion(Add) / Exclusion(Remove)
Inclusion(Add):Please press the Z-Wave button when the Z- Wave controller
sends the instructions for inclusion, Press the Button 3 times it will send the
NIF
Exclusion(Remove):Please press the Z-Wave button when the Z-Wave
controller sends the instructions for exclusion, Press the Button: 3 times it will
send the NIF
2. Resetting the device
Press and hold the button 10 seconds . The device will send the reset notification to
the list node in the group1 and erases the device memory.
Note: This should only be used in the event your networks primary controller is missing or
otherwise inoperable.
3. Association capabilities
If setting the association this valve may send the Switch_Binary_report to the node.
Group 1-Lifeline can setting and support 5 nodes. ( Group 2~5 is not support)
4.Support Z-Wave COMMAND_CLASS
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_BASIC
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURE_SPECIFIC
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_POWERLEVEL
Z-Wave Button
