ZED-F9T - Integration Manual
If casting is required, use viscose or another type of silicon pottant. The OEM is strongly advised to
qualify such processes in combination with the module before implementing this in the production.
Casting will void the warranty.
Grounding metal covers
Attempts to improve grounding by soldering ground cables, wick or other forms of metal strips
directly onto the EMI covers is done at the customer’s own risk. The numerous ground pins should
be sufficient to provide optimum immunity to interferences and noise.
u-blox makes no warranty for damages to the module caused by soldering metal cables or
any other forms of metal strips directly onto the EMI covers.
Use of ultrasonic processes
Some components on the module are sensitive to ultrasonic waves. Use of any ultrasonic processes
(cleaning, welding etc.) may cause damage to the GNSS receiver.
u-blox offers no warranty against damages to the module caused by any Ultrasonic
Processes.
5.3 Tapes
The
Figure 42
shows the feed direction and illustrates the orientation of the ZED-F9T high accuracy
timing receivers on the tape: (F9P reel shown for illustrative purposes).
Figure 42: Orientation of ZED-F9T high accuracy timing receivers on the tape
The dimensions of the tapes for ZED-F9T high accuracy timing receivers are specified in
Figure 43
(measurements in mm).
UBX-19005590 - R01
5 Product handling
Page 75 of 80
Advance Information
