Safety
2.0
7
Note!
The dust extractor should be stored in a dry, warm (above zero) location when
not in use.
Note!
If the dust extractor is stored in a cold location (below zero), it must be placed
in a warm location (above zero) for at least two hours before use.
Note!
Discolouration on the top of the HEPA filter indicates that the main filter is not
functioning as it should. If the HEPA filter is dirty on the underside, the filter is
defective.
Note!
When checking the HEPA filter, the dust extractor must be placed in the
operating position.
7\UROLW9&('
