Introduction
4
2.0
1.8
Handling and storage
The dust extractor should be stored in a heated, dry area when not in use. Otherwise it
may be damaged by condensation and cold.
The dust extractor can be lowered to the transport position, which facilitates transport
and maintenance work. Always ensure that the dust extractor is securely fastened to the
handle (Figure 3-2, page
9
, pos 3), e.g. with lifting straps, during high lifts. Make
sure that all the constituent parts of the machine are properly assembled before lifting.
Warning!
If handled carelessly, the dust extractor can overturn and cause both personal
injury and damage to the equipment.
1.9
Noise
Warning!
Always use hearing protection when using the dust extractor
This dust extractor is tested for noise in accordance with ISO 11202 and ISO 3741. For
information on the sound pressure level and sound power level for each model, see the
table in Chapter Technical data, page
34
.
7\UROLW9&('
