TYROLIT Hydrostress HYCON HRS 5806, Operating Manual, Page: 13 / 16

HYCON HRS Ring Saw
HYCON A/S • Juelstrupparken 11 • DK-9530 Støvring • Tel +45 9647 5200
10
Replacement of Disc Replacement of Support and
Guide Rollers
Use a ring spanner size 17 mm to hold on to the hexagon
washer, and use a hex head wrench size 4 mm to loosen the
screws.
The support rollers and the guide rollers can now be removed.
Do not retip the diamond disc. Use only
original discs. Contact your local dealer for
further information.
When mounting the disc make sure that the
three raised edges on the guide roller and the
three grooves on the disc interlock.
Lock the screws with Loctite 275 when
mounting them again
The roller edge interlocking with the disc
must be sharp. Replace the roller if the edge
is not sharp.