HYCON HRS Ring Saw
HYCON A/S • Juelstrupparken 11 • DK-9530 Støvring • Tel +45 9647 5200
9
Dismounting of Front Cover and
Water Blade
Use a hex head wrench size 4 m to loosen the 3 screws.
Remove the front cover.
Remove the entire water blade.
Replacement of Drive Wheel
Use a hex head wrench size 4 mm to loosen the 2 hexagon
screws. You can use a two pin wrench to prevent the drive
wheel from turning round.
If the drive wheel is worn out replace
immediately. Use only original spare parts.
Contact your local dealer for further support
and information.
Summary of Contents for HYCON HRS 5806
Page 16: ......
