TYROLIT
Hydrostress AG
Page 7
Ring saw HRE400
Service
• Allow only qualified and skilled personnel to repair your tool using only original spare
parts.
That guarantees the safety of the electrical tool is maintained.
Safety information for hand saws
• Wear hearing protection when using hand saws.
The effect of noise can lead to a loss of
hearing.
• Use the handles fitted to the tool.
Losing control of the machine can lead to injuries.
• Hold the tool using the insulated gripping surfaces when carrying out work that risks
the tool being used coming into contact with concealed power cables or its own mains
cable.
Contact with a live conductor can cause metal parts to become live and result in an
electric shock.
Pay attention to the safety instructions
Do not work with the electrical tool unless you have read and understood the safety
instructions.
The electrical tool has been inspected before being shipped and is delivered in perfect
condition. TYROLIT Hydrostress does not accept liability for damage caused by failing to follow
these instructions. This applies in particular to the following damage:
• Damage caused by improper use and operator error
• Damage caused by failure to observe the safety-related information in these instructions or
the warning signs on the electrical tool
• Damage caused by substandard maintenance work
Intended use
The electrical tool is used by trained personnel to cut concrete, masonry and stone.
Incorrect use:
• Working without protective equipment or inadequate protective equipment
• Cutting other materials
• Removing protective devices
• Cutting in potentially explosive areas
• Cutting loose parts
• Incorrect or absence of waste water disposal (sawing sludge)
2.1.5
2.1.6
2.2
2.3
