background image

5

3)  Wear complete eye protection and clothing protection. Avoid 

touching eyes while working with battery.

4) If battery acid contacts skin or clothing, wash immediately with soap 

and water. If acid enters eye, immediately flood eye with running cold 

water for at least 10 minutes and get medical attention immediately.

5) NEVER smoke or allow a spark or flame within the vicinity of battery 

or engine.

6) Be extra cautious to reduce risk of dropping a metal tool onto battery. 

It might spark or short-circuit battery or other electrical part that may 

cause explosion.

7) Remove personal metal items such as rings, bracelets, necklaces, and 

watches when working with a lead-acid battery. A lead-acid battery can 

produce a short-circuit current high enough to weld a ring or the like to 

metal, causing a severe burn.

o)  When charging the internal battery, work in a well ventilated area and do 

not restrict ventilation in any way.

p)  Under abusive conditions, liquid may be ejected from the battery; avoid 

contact. If contact accidentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. Liquid ejected from the battery may 

cause irritation or burns.

q)  Do not expose a jump starter to fire or excessive temperature. Exposure to 

fire or temperature above 130°C (266°F) may cause explosion. 

r)  Have servicing performed by a qualified repair person using only identical 

replacement parts. This will ensure that the safety of the product is 

maintained.

s)  Attach output cables to a battery and chassis as indicated 

below. Never allow the output clamps to touch one another. 

t)  Dropping, hitting, or other excessive amounts of force 

to the Jump Starter may damage the unit (external and 

internal), which may result in loss of operation, electrical 

fire, or cause other serious damage.

u)  Do not overcharge the internal battery or short circuit 

output connector.

v)  This product is suitable for use in home, office, household workshop or 

garage. Do not operate in rough environment such as repair facility.

WARNING: 

This Jump Starter is only intended to jump start 12V cars, trucks, 

boats, or motorcycles with an internal combustion engine and single lead-acid 

battery systems. Do not use this device to jump start batteries outside of these 

four types of vehicles; doing so may cause a fire or other serious injuries. Refer to 

the user manual for additional safety information. 

WARNING CONT.:

SAVE THESE INSTRUCTIONS

Summary of Contents for AC532780

















Reviews: