background image

4

WARNING CONT.:

IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using this product, basic precautions should always be 

followed, including the following:
a)  Read all the instructions before using the product.

b)  To reduce the risk of injury, close supervision is necessary when the product 

is used near children. Children should not operate this device unless under 

strict supervision by a person responsible for their safety.

c)  Do not put fingers or hands into the product.

d)  Do not use any attachment that is not sold by jump starter manufacturer which 

may result in a risk of fire, electric shock, or injury to persons.

e)  To reduce risk of damage to the electric plug and cord, pull the plug rather 

than the cord when disconnecting the jump starter.

f)  Do not use a battery pack or appliance that is damaged or modified. 

Damaged or modified batteries may exhibit unpredictable behavior 

resulting in fire, explosion or risk of injury.

g)    Do not operate the jump starter with a damaged cord or plug, or a 

damaged output cable.

h)  Do not disassemble the jump starter; take it to a qualified service person 

when service or repair is required. Incorrect reassembly may result in a risk 

of fire or electric shock.

i)  To reduce the risk of electric shock, unplug the jump starter from the outlet 

before attempting any instructed servicing.

j)  WARNING - RISK OF EXPLOSIVE GASES. 

1) WORKING IN VICINITY OF A LEAD ACID BATTERY IS DANGEROUS. 

BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY 

OPERATION. FOR THIS REASON, IT IS OF THE UTMOST IMPORTANCE 

THAT YOU FOLLOW THE INSTRUCTIONS EACH TIME YOU USE THE   

JUMP STARTER.

2)  To reduce risk of battery explosion, follow these instructions and 

those published by battery manufacturer and manufacturer of any 

equipment you intend to use in vicinity of the battery. Review 

cautionary marking on these products and on engine.

k)  The device shall be stored indoors and protected from the elements;

l)  The unit shall not be charged outdoors;

m)  When in use, steps should be taken to reduce the exposure to rain, sleet, 

snow, and the like.

n)  PERSONAL PRECAUTIONS 

1) Consider having someone close enough by to come to your aid 

when you work near a lead-acid battery.

2)  Have plenty of fresh water and soap nearby in case battery acid 

contacts skin, clothing, or eyes.

Summary of Contents for AC532780

















Reviews: