To load a .STL file, click ‘OPEN’ and then navigate to the desired STL file. To use one of the supplied Type
A Machines .STL files, open the file where you unzipped the Setup Package and open the folder called Test
Prints” select one of the included .STL files (figure 6.3.6).
Figure 6.3.7 shows a visualization of a loaded .STL file. If the file you loaded looks very small you may be
having a unit conversion problem. To fix this, right click on the image of the .STL in the upper right hand
corner (figure 6.3.7) and click “inch->mm”. This will scale your model correctly.
Figure 6.3. 6
Figure 6.3. 7
