TYM T1054, Operator'S Manual

Page: 74 / 204

2 - 2
DESCRIPTION OF OPERATION SYSTEM
J10O331A
1 2
9 10 8 7
11 3 4 5 6
< Electronic lift control >
1 Control lever (Lifting/Lowering)
2 Attenuation function ON button
3 Attenuation function ON indica-
tor
4 Diagnosis indicator
5 Lift arm upper position limit con-
trol knob
6 Lift arm lowering speed control
knob
7 Position/Draft sensitivity control
knob
8 Working depth control knob
9 Arm lifting indicator
10 Arm lowering indicator
11 Arm lifting indicator
To prevent damage to electron-
ic components, keep the following
instructions when arc welding the
tractor equipped with the electronic
lift or an attached implement.
Separate an implement or part to
be welded from the tractor if pos-
sible.
Disconnect the two battery ca-
bles.
Set the welding machine's ground
clamp as close as possible to the
point to be welded.
Remove the control unit first if the
welding spot is within 1 m from
the unit.
Make sure that the cable is not
close to or over any electric or
electronic lead while welding.
•
•
•
•
•
CAUTION