TYM T1054, Operator'S Manual

Page: 106 / 204

3 -
OPERATION
hOw TO sTART ENgINE
①
Make sure that there is no obsta-
cle around the tractor.
②
Seat on the driver's seat and
confirm that the parking brake is
applied.
③
Check that each shift lever and
PTO switch are in the neutral
position.
④
Pull the throttle lever halfway.
⑤
Depress the clutch pedal. The
safety switch is activated.
⑥
Insert the key into the main
switch and turn the switch to
the "ON" position. Check that
the engine oil lamp and charge
warning lamp come on.
⑦
Turn the main switch to the
"START" position. When the
engine is started, release the
switch.
⑧
Confirm that all monitoring lamps
go off after the engine is started.
►
＊
ENgINE sTARTINg CONdITION
1. The engine can be started
when operating the ignition
switch with the shuttle shift
lever in the neutral position,
PTO switch in the OFF position
and clutch pedal depressed.
2. If any of the above thee
conditions is not satisfied, the
engine cannot be started.
1. ENgINE sTARTINg
Never start the engine by con -
necting the start motor terminal or
safety switch directly. The tractor
may move suddenly and cause
an accident.
•
WARNING
Do not turn the main switch to the
"START" position while the engine
is running.
Avoid running the start motor over
10 seconds. It consumes a lot of
current.
If the engine cannot be started
within 10 seconds, wait for 30 sec -
onds and try it again.
•
•
•
NOTE