Tylo Prime+ 1811, User Manual

Page: 4 / 61

Position the floor panel in such a way that the ceramic tiles/ IR floor heating point towards the front
of the sauna.
Note: Put the ceiling, bench valance and bench aside until the corresponding steps.
Rear wall panel (
Box
2):
• Place the rear wall panel part into the rear slot on the floor panel.
• Attach the second back panel section to the first back panel section (see picture below).
• The back panel part must be held upright until the right panel is fitted.
• Connect the electricity supply to the B-1 junction box.
• Fix the cover of the B-1 junction box with 2 Phillips screws.
Note – Put the front panel aside until the “Front panel” section.
Page 4