MM-014716-001
46
PART
FUNCTION
DIS
Used to adjust the current display intensity and the keypad backlight level.
IND
Used to call an individual or make an all-call by selecting the individual call function.
8.1.1 Primary Functions (Quick Access)
The secondary function of the
SCAN
button is to toggle the keypad buttons between their primary
function and their secondary function. When the secondary keypad is active, i.e. entering phone digits for
an interconnect call, the
SCAN
button can be used to toggle the keypad buttons back to their primary
function, perform a task, and then toggle back to finish entering the digits for the phone number.
PRIMARY
is displayed when the
SCAN
button is used to toggle the keypad keys back to their primary
functions. This provides quick access to the primary functions of the keypad. This is a programmable
feature of the
SCAN
button only. Careful consideration should be given to possible operational conflicts
before enabling this feature.
Several keys on the Scan version have a secondary function. The
MENU
key is the SELECT secondary
function with the
CLEAR
key remaining the same for the secondary function. On the System version, the
OPT
has a secondary function of DELETE,
MENU
is SELECT, and
CLR
retains its CLEAR
functionality.
8.2
TURNING THE RADIO ON
Rotate the
POWER ON-OFF/VOLUME
knob clockwise, out of detent to turn the radio on. A short
beep (if enabled through programming) indicates the radio is ready for operation. The display indicates, if
programmed, the last selected system name on line 1 and the last selected group or channel name on line
2.
8.3
SELECTION MODE RULES
Many operations require selection from a list such as system, group or phone number. This selection
process is handled in the same manner for all lists. The
ramp control,
MENU
,
0-9
,
*
,
#
, and the
CLR
button are used during the selection process. The following example systems list is used to explain
the process:
The hookswitch functions the same as the
CLR
key in I-Call, phone call, and menu
modes.
SYSTEM
1 NORTH
2 SOUTH
3 EAST
4 WEST
After entering a selection mode, the following generic display format will appear:
X X X X X X X X
Y Y Y = Z Z Z
Summary of Contents for M/A-COM
