Tyco Electronics M/A-COM, Operator'S Manual

Page: 25 / 104

MM-014716-001
25
Table 7-4: Basic Menu Structure
Menu Name
Radio Displays
(top and bottom lines)
Usage Notes
To/From Dwell Display
registration, RF sync and
transceiver status codes
Engineering Display
(Menu may not be
available per
programming.)
bit-error rates
and RSSI data
Displays radio system connection data. For engineering use.
OFF/ON
Silent Emergency
“ SilentEmerg ”
Use to toggle Silent Emergency OFF/ON.
available modes
Operating Mode
(e.g., OTP, EDACS, etc.) “ Mode Menu ”
Use
to choose an available mode. Press MENU and
confirm (Y/N) with and press MENU again.
current latitude and
longitude GPS Fix
“ GPS Fix ”
Radio’s current GPS latitude and longitude position scrolls
across top line of the display. Applies to GPS-equipped radios
only.
User ID # of user
currently logged in User ID
“ User ID ”
User’s identification/name scrolls across top line of the display
(if programmed).
Radio’s IP address
IP Address
“ IP Address ”
Radio’s Internet Protocol (IP) address scrolls across top line of
the display.
station’s call sign
Station Identification
“ Station ID ”
Station’s identification/name scrolls across top line of the display
(if programmed).
“OFF”
Stealth Mode
“ StealthMenu ”
Use to enable. Press any button to disable.
“LOW”, “MEDIUM”,
“MEDHIGH”, “HIGH” Treble Level
“ Treble Menu ”
Use to choose speaker/headset treble level. Press
Select to return to dwell display.
“<< >>”
Display Brightness
“ Bright Menu ”
Use to dim or brighten. Press MENU to return to dwell
display.
“OFF”, “LOW”, “MED”,
“HIGH” Side Tone Level
“ Side Menu ”
Use to choose side tone level. Press MENU to return to
dwell display.
“ON” or “OFF”
Intercom
“ INTERCOM ”
Use to turn intercom on and off. Press MENU to return to
dwell display.
selected channel Selected Channel
(Menu may not be
available per radio
programming)
“ ChannelMenu ”
Displays the current channel. Press MENU to return to dwell
display.
See Next Page