1 4
7.4
Place the cover on the box base and secure the cover with the
screws.
8
Important steps during installations
•
Make sure that grooves on FAS and wraparound groove plate are
clean.
•
Clean the fibers
•
Tubes routed up to the tube holder should be routed in such a way
that complete access to the tubes is possible without creating
crossings and without creating distortions on the tubes already
installed in the tube holder.
•
Use correct lengths in the tube holder.
•
Make sure not to loose ID
9
Rearrangement
•
Avoid to pull fibers in-between groove plates
•
Avoid fiber movement between tube holder and first containment
lip on the FAS block.
•
If accidentally active fibers are removed from the containment
devices, reposition them carefully.
7.5
In case of a box with lock insert first the four guiding pins in the
box before installing the cover.
7.3
In case of a inner cover hook the cover over the brackets and
secure with the key.
