Page 18 / 19 ECOC: EGC0 ; LOC: AI
5-744014-2
411-18256 Rev.F
9 Maintenance and preventive maintenance
Prior to operation the hand tool must be in a properly maintained and clean condition. Any residues
should be removed.
Joints should be lubricated regularly with a light precision mechanics oil and protected against soiling.
Please ensure that all pins are secured by retaining rings.
The cutting device and, in particular, the cutting blade should be protected against damage thus resulting
in the hand tool being unfit for use.
If the cutting tool is no longer required, it should be stored in a dry clean conditions.
Please consult the hand tool manufacturer in the event
of any repairs being necessary.
ATTENTION !
Replacement of the cutting blade on the cutting device may be performed by the manufacturer only!
Crimping height after processing spec. 114-18322
10 Spare parts
Cutting device with round cutter complete: PN 2-539783-7
Stripping and cutting blades (Kit): PN 2-539783-9
