Page 17 / 19 ECOC: EGC0 ; LOC: AI
5-744014-2
411-18256 Rev.F
8
Blade unit replacement
The blade unit pos.1 Fig. 4 (cable cutter blade and stripper blade) is replaced by loosening the hexagon
socket screws pos. 3 Fig. 4 and removing the set pins pos.2 Fig. 4 on the top die and bottom die of the
tool head.
ATTENTION !
Due to the high degree of dimensional precision required, it is absolutely essential that the blade
unit be properly and expertly dismantled and mounted.
figure 4
figure 4 Blade unit replacement
1 ... Blade unit
2 ... Set pin
3 ... Hexagon socket screw
3
2
1
2
3
cutting
stripping
