Page 12 / 19 ECOC: EGC0 ; LOC: AI
5-744014-2
411-18256 Rev.F
1 Using the operating manual
The operating manual must always be within reach of the hand tool.
Whoever uses the hand tool must be familiar with the operating manual and observe the instructions
therein.
Tyco Electronics decline to accept any liability for damages incurred by non-observance of the hand
tool instructions or operating manual.
The user is responsible for supplementing the operation manual with any instructions resulting
from current national regulations on accident prevention and environmental protection.
2 Basic safety instructions
The hand tool is constructed according to state-of the-art technology and the acknowledged technical
safety regulations.
RoHS information
Information on the presence and location of any substances subject to RoHS (Restriction on Hazardous
Substances) can be found at the following website:
http://www.tycoelectronics.com/customersupport/rohssupportcenter/
Click on “Find Compliance Status…” and enter equipment part number.
2.1 Responsibilities
The hand tool may only be operated by suitably trained and authorized personnel.
The user must clearly define and observe the responsibilities of the personnel for operation,
maintenance and service.
Should the user make any changes to the hand tool without consulting the manufacturer or supplier, the
latter will not be liable for any resultant damage.
2.2 Notes on setting up and operating the hand tool
The hand tool may only be set up and operated in perfect technical condition, observing all the safety
regulations and with due regard to any potential dangers.
The hand tool may only be used for the purpose specified in the operating manual.
The manufacturer and supplier do not accept liability for any damage which may result from the hand tool
being used for a purpose other than that specified.
Such usage is entirely at the user's own risk.
3 Hand tool implementation
The hand tool is used to strip and cut polymer optical fiber cables (POF cables) with a diameter of outer
jacket 2.3 mm for the “MOST” system.
