manualshive.com logo in svg

Tyco Electronics 0-15910 Series, User Manual

Share
Download
Tyco Electronics 0-15910 Series User Manual Download Page 28

 

8 Port SNMP Managed Switch – User Manual 

Page

 

28

 

 
 

Product Number 0-15910xx-x 

© Tyco Electronics 2004 

PL0357 Issue A 

Create VLAN Group 

This menu section controls the VLAN Group Membership of the switch and is selected from the 

Switch Configuration menu screen. This allows specified ports to be made members of specific 

VLAN groups.  

 

VLAN Name 

This is a local value intended to provide a simple description of the VLAN, such as Sales, 

Accounts etc. 

 

VLAN Group ID 

This is the VLAN ID that is used to provide a number for the specific VLAN. The legal range is 1 

to 4094, with 1 being the default value. It is recommended that a VLAN ID number other than 1 

be applied to new port based VLAN configurations. The VLAN Group ID must be a unique 

number. 

 

VLAN Port Membership 

Ports that are to be members of this VLAN are specified in the table by using <

Tab

> key to 

move to the Port area and then the <

Space

> key to toggle the membership status between 

None and Member. Select the required ports to be members of this VLAN and then use <

Esc

> 

to move to the action line and then 

Save

 the settings.  

 

 

Edit/Delete VLAN Group 

This menu section is selected from the Switch Configuration menu screen and allows an 

existing VLAN group to be edited or even deleted. When this option is selected, all existing 

VLAN groups on the switch are displayed. Use the <

Tab

> key to navigate to the <

Edit

> field or 

<

Delete

> field on the Action line and then use the <

CR

> key to select the edit option.  

 

If <

Edit

> was selected, the cursor now moves to the VLAN group area and use the <

Tab

> key 

to select the required group and apply the required changes. Use the <

Esc

> key to return to the 

action line and then <

Save

> the changes. 

 

If <

Delete

> was selected, the cursor now moves to the VLAN group area and use the <

Tab

> 

key to select the required group and then <

CR

> to delete the VLAN group. Use the <

Esc

> key 

to return to the action line and then <

Save

> the changes. Note that a deleted VLAN group 

cannot be recovered after the process has been <

Save

d> 

Summary of Contents for 0-15910 Series














































Reviews:

No comments

Brands by name

Popular brands

Load more brands