8 Port SNMP Managed Switch – User Manual
Page
10
Connecting to the Switch
The Console port is a male DB-9 connector located on the front panel of the switch that enables
a connection to a PC or terminal for monitoring and configuration. Use the supplied RS-232
cable with a female DB-9 connector to connect a terminal or PC to the Console port.
The Console configuration allows you to program the Switch to enable a user at a remote
location to communicate with the unit as if the console terminal were directly connected.
Figure 3-4. Connecting the 8Port SNMP Managed Switch to a terminal via
RS-232 cable
Product Number 0-15910xx-x
© Tyco Electronics 2004
PL0357 Issue A
