8 Port SNMP Managed Switch – User Manual
Page
12
Management Using The Console
Configuring the Console Interface
When the connection between Switch and PC is complete, turn on the PC and run a terminal
emulation program such as Hyper Terminal and configure its communication parameters to
match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Control flow: None
Figure 6. Serial communication settings
Figure 7. Initial Start-Up Screen
Product Number 0-15910xx-x
© Tyco Electronics 2004
PL0357 Issue A
