TYAN Transport GT26-B4987, Service Manual, Page: 28 / 125

Chapter 2: Setting Up
2.0.1 Before you Begin
This chapter explains how to install the CPU, CPU heatsink,
memory modules, and hard drives. Instructions on inserting PCI
card and HTX card are also given.
2.0.2 Work Area
Make sure you have a stable, clean working environment. Dust and
dirt can get into components and cause malfunctions. Use
containers to keep small components separated. Putting all small
components in separate containers prevents them from becoming
lost. Adequate lighting and proper tools can prevent you from
accidentally damaging the internal components.
2.0.3 Tools
The following procedures require only a few tools, including the
following:
z A cross head (Phillips) screwdriver
z A grounding strap or an anti-static pad
Most of the electrical and mechanical connections can be
disconnected using your fingers. It is recommended that you do not
use needle-nosed pliers to remove connectors as these can
damage the soft metal or plastic parts of the connectors.
20 Chapter 2: Setting Up