Thunder HEsl S2567
45
Error Messages
The following error messages may appear if something goes wrong during the boot process.
Using the Configuration Utility
Throughout the setup, selections that are not selectable are greyed out. Listed below are keys that you
can use throughout the setup.
Adapter removed from boot order, parame-
ters will be updated accordingly
Configuration data invalid, saving default
configuration!
This appears when an adapter is removed from the
system or relocated behind a PCI bridge.
This appears if none of the information in the
NVRAM is valid.
Error Message
Possible Reason For Error
This appears when less than four adapters are in the
boot order and more adapters exist than are shown.
Found SCSI Controller not in following
Boot Order List, to Add: Press Ctrl-C to
start Symbios Configuration Utility...
NOTE:
The SCSI BIOS Configuration Utility is a powerful tool. If you somehow disable all of
your controllers, pressing
CTRL-A
(or
CTRL-E
on BIOS version 4.04 or later) after
memory initialization during reboot allows you to re-enable and reconfigure.*
NOTE:
Not all devices detected by the Configuration Utility can be controlled by the BIOS.
Devices such as tape drives and scanners require that a device driver specific to that
peripheral be loaded. The SCSI BIOS Configuration Utility does allow parameters to
be modified for these devices.
F1
F2
Accesses the context sensitive help for the cursor-
resident field.
Sets cursor content to the menu selection area.
Select a menu item and press [ENTER].
Key
Function
Select item
Arrow Keys
Select item; use Up/Down/Left/Right keys to position
the cursor.
Home/End
Changes item value to next relative value.
+/-
Abort/exit the current operating and/or exits the cur-
rent screen. User confirmation may occur.
ESC
Press [ENTER] to execute the field’s associated
function.
Enter
* under qualification at time of print, check Tyan website for updates:
http://www.tyan.com
SCSI
&
LAN
