Thunder HEsl S2567
25
2.13 Connecting the power supply
This motherboard requires an ATX power supply. Tyan recommends using a
250W or higher
power sup-
ply that also conforms to industry standard Revision 2.01. The images below show the ATX power con-
nector before (
Figure 2.8a
) and after (
Figure 2.8b
) it has been plugged in. The clip on the power
connector should lock over the tab on the onboard connector. You shouldn’t be able to plug the power
connector in any other way but just to be safe, make sure it looks like
Figure 2.8b
. Make certain that you
do not miss connecting any of the pins because if you do, you will void your warranty and possibly cause
damage to yourself and/or your motherboard when the power is turned on. After connecting the power,
make sure the connector is seated firmly into its socket so it will not become loose or fall off when the
computer is jostled or moved.
You are done!
Other than checking the jumper settings and cable connections, and putting the case back on, you are
done. Installing a new motherboard may seem difficult, but by following these directions, you should have
a fairly uneventful time installing our products. If you do encounter problems, your dealer will be able to
help you, or you can consult one of our many technical support resources (see p. 7).
Figure 2.8b
1
2
Figure 2.8a
INS
T
ALL
