TYAN THUNDER 2400, User Manual

Page: 69 / 105

S2257 Thunder 2400
69
PM Mode
This option allows you to select the type of power management used on this
machine.
Standby TIme Out
This option specifies the length of a period of system inactivity while in Full
power on state. When this length of time expires, the computer enters Standby
power state. The settings are Disabled, 4 msec, 8 msec, up to and including 508
msecs, in increments of 4 milliseconds. Default is Disabled.
Suspend Power Saving Type
There are several types of sleeping states within the general sleep state. This
option allows you to choose how “asleep” you want your system to be. In
deeper sleep modes, more energy is saved. However, upon waking up, the
system must “reorient” itself, and reestablish control over the system’s
sleeping components.
Suspend Time Out
This option defines the length of time that the system, while in Standby mode,
must be inactive before it enters Suspend mode. The settings are Disabled and
from 4 minutes to 508 minutes, in increments of 4 minutes.
BIOS
6HWWLQJ2SWLRQ
Optimal Default F ail-Safe D efault
Manual Throttle Ratio 50% 50%
Intruder Sel SMI SMI
A dvanced SM I Enable C o ntro ls
Timer Overflow Enable Disabled Disabled
Thermal SMI Enable Disabled Disabled
PME SM I Enable Disabled Disabled
SW SMI Timer Enable Disabled Disabled
TCO Logic SMI Enable Enabled Enabled
SLP SMI Enable Disabled Disabled
A dvanced Resume Event C o ntro ls
RTC Resume Disabled Disabled
AC97 Logic Resume Disabled Disabled
USB Controller Resume Disabled Disabled
PME Resume Enabled Disabled
RI Resume Disabled Disabled
SM BUS Resume Disabled Disabled