S2257 Thunder 2400
29
INST
A
LL
Installing SECC2 CPUs - Option 2
Another method to secure an
SECC2 CPU is by using the
Universal Retention Module
(included in package). The
universal retention module is
designed to accommodate most
versions of the Pentium II / III
CPUs. Included in this solution is
an overhead clip to lock the CPU
into its slot along with the side
universal braces. See Figure 2-18
(right) for the universal retention
module components.
To install the CPU, place the
two side braces at the ends
of the CPU slot (see Figure 2-
19 left). The screws on the
motherboard should fit
through the holes of the
retention braces. Tighten
and secure both braces using
a screw driver.
Next, carefully insert the
CPU between the braces
and onto the CPU slot
(see Figure 2-20). Make
sure the CPU fan faces
towards the center of the
motherboard.
Figure 2-19
Figure 2-20
Figure 2-18
Top Clip
Side Braces
