http://www.tyan.com
26
On both sides of the SECC2 CPU reside the lower tabs of the aluminum heat
sink and the bottom corners of the plastic CPU enclosure (see Figure 2-13).
These tabs and corners should fit into the retention braces.
Warning: DO NOT first screw the retention braces onto the motherboard by
themselves. If you do, you will have difficulties inserting the CPU into the
retention braces and CPU slot.
Chapter 2
Board Installation
!
important!
Slot1 CPU SECC2 - Slot1 CPU
Figure 2-12
Lower Tabs
Enclosure
Corners
Figure 2-13
