50
Chapter 4
are Off, Standby, Suspend, or Disabled. The Optimal and Fail-Safe
default settings are Disabled.
Video Power Down Mode
This option specifies the power state that the video subsystem enters
when AMIBIOS places it in a power saving state after the specified
period of display inactivity has expired. The settings are Standby,
Suspend or Disabled. The Optimal and Fail-Safe default settings are
Disabled.
Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk
drive enters after the specified period of hard drive inactivity has
expired. The settings are Disabled, Standby, or Suspend. The Optimal
and Fail-Safe default settings are Disabled.
Hard Disk Timeout (Minute)
This option specifies the length of a period of hard disk drive inactiv-
ity. When this length of time expires, the computer enters power-
conserving state specified in the Hard Disk Power Down Mode option
(see the previous page). The settings are Disabled, 1 min. (minute), 2
min, 3 min., 4 min., 5 min., 6 min, 7 min., 8 min., 9 min., 10 min., 11
min., 12 min., 13 min., 14 min, and 15 min. The Optimal and Fail-Safe
default settings are Disabled.
Standby/Suspend Timer Unit
This option specifies the unit of time used for the Standby and Sus-
pend timeout periods. The settings are 4 msec, 4 sec, 32 sec, or 4 min.
The Optimal and Fail-Safe default settings are 4 min.
Standby Timeout
This option specifies the length of a period of system inactivity while
in Full power on state. When this length of time expires, the computer
enters Standby power state. The settings are Disabled, 4 msec, 8 msec,
12 msec, 16 msec, up to 508 msec, in increments of 4 msec. The
Optimal and Fail-Safe default settings are Disabled.
