46
Chapter 4
setting), 42mA, 38mA, or 33mA. The Optimal and Fail-Safe default
settings are Auto.
DQM Buf. Strength
This option sets the strength of the signal for the DQM buffer. The
settings are Auto (AMIBIOS automatically determines the correct
setting), 42mA, 38mA, or 33mA. The Optimal and Fail-Safe default
settings are Auto.
CSX Buf. Strength
This option sets the strength of the signal for the CSX buffer. The
settings are Auto (AMIBIOS automatically determines the correct
setting), 48mA, 42mA, or 22mA. The Optimal and Fail-Safe default
settings are Auto.
CS7:6 Buf. Strength
This option sets the strength of the signal for the CS7:6 buffer. The
settings are Auto (AMIBIOS automatically determines the correct
setting), 48mA, 42mA, or 22mA. The Optimal and Fail-Safe default
settings are Auto.
CS5:0 Buf. Strength
This option sets the strength of the signal for the CS5:0 buffer. The
settings are Auto (AMIBIOS automatically determines the correct
setting), 48mA, 42mA, or 22mA. The Optimal and Fail-Safe default
settings are Auto.
PAC Bus SERR#
Set this option to Enabled to enable the SERR# signal on the PAC bus.
The settings are Enabled or Disabled. The Optimal and Fail-Safe
default settings are Enabled.
AGP Common SERR#
Set this option to Enabled to permit a common SERR# signal for AGP
and the standard PC bus. The settings are Enabled or Disabled. The
Optimal and Fail-Safe default settings are Enabled.
