37
Display Mode At Add-On ROM Init
This option specifies the system display mode that is set at the time
that AMIBIOS POST initializes an optional option ROM. The settings
are as follows:
Floppy Access Control
This option specifies the read/write access that is set when booting
from a floppy drive. The settings are Read/Write or Read-Only. The
Optimal and Fail-Safe default settings are Read/Write.
Hard Disk Access Control
This option specifies the read/write access that is set when booting
from a hard disk drive. The settings are Read/Write or Read-Only. The
Optimal and Fail-Safe default settings are Read/Write.
S.M.A.R.T. For Hard Disks
Set this option to Enabled to permit AMIBIOS to use the SMART
(System Management and Reporting Technologies) protocol for
reporting server system information over a network. Enabling this
feature allows you to back up your data when your hard disk is about
to fail. The settings are Enabled or Disabled. The Optimal and Fail-
Safe default settings are Disabled.
Boot Up Num Lock
Set this option to Off to turn the Num Lock key off when the computer
is booted so you can use the arrow keys on both the numeric keypad
and the keyboard. The settings are On or Off. The default settings are
On.
Setting
Description
Force BIOS
The display mode currently being used by AMIBIOS is used.
Keep Current
The current display mode is used.
BIOS
