TYAN Tank GT20 (B5372-H), Service Manual

Page: 6 / 80

iv
SAFETY INFORMATION
Before installing and using the Tank GT20, take note of the following
precautions:
–
Read all instructions carefully.
–
Do not place the unit on an unstable surface, cart, or stand.
–
Do not block the slots and opening on the unit, which are pro-
vided for ventilation.
–
Only use the power source indicated on the marking label. If
you are not sure, contact the Power Company.
–
The unit uses a three-wire ground cable, which is equipped
with a third pin to ground the unit and prevent electric shock.
Do not defeat the purpose of this pin. If your outlet does not
support this kind of plug, contact your electrician to replace
your obsolete outlet.
–
Do not place anything on the power cord. Place the power
cord where it will not be in the way of foot traffic.
–
Follow all warnings and cautions in this manual and on the
unit case.
–
Do not push objects in the ventilation slots as they may touch
high voltage components and result in shock and damage to
the components.
–
When replacing parts, ensure that you use parts specified by
the manufacturer.
–
When service or repairs have been done, perform routine
safety checks to verify that the system is operating correctly.
–
Avoid using the system near water, in direct sunlight, or near
a heating device.
–
Cover the unit when not in use.