TYAN Tank GT20 (B5372-H), Service Manual

Page: 5 / 80

iii
About this Manual
This manual provides you with instructions on installing your Tank
GT20. This manual is intended for experienced users and integra-
tors with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Tank GT20 B5372-
H bare-bones, packing list, describes the external
components, gives a table of key components,
and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory modules, an optional PCI-E card, and hard
drives.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Provides information on installing SMDC cards
and describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables and FRU parts list are also provided for ref-
erence of system setup.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.