TYAN Tank GT14 B5180, Service Manual

Page: 67 / 121

Chapter 3: Replacing Pre-Installed
Components
3.1 Introduction
This chapter explains how to replace pre-installed
components, including the Motherboard, LCD Module,
cooling fans and power supply.
3.1.1 Work Area
Make sure you have a stable, clean working environment.
Dust and dirt can get into components and cause
malfunctions. Use containers to keep small components
separated. Putting all small components in separate
containers prevents them from becoming lost. Adequate
lighting and proper tools can prevent you from
accidentally damaging the internal components.
3.1.2 Tools
The following procedures require only a few tools,
including the following:
z A cross head (Phillips) screwdriver
z A grounding strap or an anti-static pad
Most of the electrical and mechanical connections can be
disconnected using your fingers. It is recommended that
you do not use needle-nosed pliers to remove connectors
as these can damage the soft metal or plastic parts of the
connectors.
Chapter 3: Replacing Pre-Installed Components 59