TYAN Tank GT14 B5180, Service Manual

Page: 56 / 121

2.
2
.2 Installing the Server in an Open Rack (with Rail kit B)
In addition to rackmounting the GT14 in a 4-post rack, you
can also mount it in a 2-post rack. You
must use rail kit B to
mount the GT14 in this type of rack.
NOTE : Before mounting the Transport GT14 in a rack, ensure
that all internal components have been installed and that the
unit has been fully tested. Maintenance can be performed on
the unit while in a rack but it is preferable to install the device
in a fully operational condition.
1. Install the inner rail brackets to left and right sides of
chassis using 3 M4-4L(E) screws for each side.
2-post open rack
48 Chapter 2: Setting Up