TYAN Tank GT14 B5180, Service Manual

Page: 103 / 121

Intruder# Detection:
This feature is used to enable/disable the function: when chassis open
event is detected, BIOS will record the event.
Disabled/ Enabled
PWRON After PWR-Fail:
When the system is shut down owing to the power failure, the system
will not be back to power on by itself. This feature allows you to set the
system back to which power status of the system when the system
power is resumed.
On / Off / Former-Sts
Wake-Up by PCI card:
When set at Enabled, any PCI-PM event awakes the system from a
PCI-PM controlled state. The options are Disabled, Enabled.
Enabled / Disabled
Power On by Ring:
An incoming call via modem awakes the system from its soft-off mode.
Enabled / Disabled
USB KB Wake-Up from S3:
When set at Disabled, it doesn’t allow USB keyboard to activate the
system from ACPI S3 power saving mode.
Enabled / Disabled
Resume by Alarm:
This feature allows you to set the when the system being turned on from
the system power-off status.
Enabled / Disabled
Chapter 4: BIOS Setup 95