http://www.TYAN.com
57
3.7.9 -
PCI/PnP Menu
Clear NVRAM
Clear NVRAM during system Boot.
[No] / [Yes]
Plug & Play O/S
No: lets the BIOS configure all the devices in the system.
Yes: lets the operating system configure Plug and Play (PnP) devices not required
for boot if your system has a Plug and Play operating system.
[No] / [Yes]
PCI Latency Timer
This setting controls how many PCI clocks each PCI device can hold the bus before
another PCI device takes over. When set to higher values, every PCI device can
conduct transactions for a longer time and thus improve the effective PCI bandwidth.
Values in units of PCI clocks for PCI device latency timer register
[64] / [32] / [96] / [128] / [160] / [192] / [224] / [248]
Allocate IRQ to PCI VGA
Yes: assigns IRQ to PCI VGA card if card requests IRQ.
[Yes] / [No]
Palette Snooping
This is the default setting and should not be changed unless the VGA card
manufacturer requires Palette Snooping to be Enabled.
Enabled: informs the PCI devices that an ISA graphics device is installed in the
system so the card will function correctly.
[Disabled] / [Enabled]
