http://www.TYAN.com
40
3.7.2 – Advanced IDE Configuration
Onboard PCI IDE Controller
[Disabled]: disables the integrated IDE Controller
[Primary]: enables only the Primary IDE Controller
[Secondary]: enables only the Secondary IDE Controller
[Both]: enables both IDE Controller
[Disabled] / [Primary] / [Secondary] / [Both]
Primary/Secondary/Third/Fourth IDE Master
While entering setup, BIOS auto detects the presence of IDE devices. This
displays the status of auto detection of IDE devices.
Hard Disk Write Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
[Disabled] / [Enabled]
IDE Detect Time Out (Sec)
Select the time out value for detecting ATA/ATAPI device(s).
0~35 (at 5 interval)
Select the mechanism for detecting 80Pin ATA(PI) Cable.
[Host & Device] / [Host] / [Device]
