TYAN S5365, Manual

Page: 67 / 79

67
96H TP_CLEAR_HUGE_ES Performs a shutdown eight to
transition from the warm start table
to the cold start table. (Optional)
97H TP_MP_FIXUP Fix-up MP table physical pointer
and checksum. (Optional)
98H TP_ROM_SCAN Configures Non-PCC PnP ISA
devices, PCI IRQs, enables PCI
devices and rom scan.
99H TP_FDISK_CHECK_SMART POST task to check SMART
status. (Optional)
9AH TP_MISC_SHADOW (Optional)
9BH TP_PMCPUSPEED (Optional)
9CH TP_PM_SETUP Late SMM initialization. (Optional)
9DH TP_SECURITY_INIT Initializes the system security
engine. (Optional)
9EH TP_IRQS Enables the proper hardware
interrupts.
9FH TP_FDISK_FAST_INIT2 (Optional)
A0H TP_TIME_OF_DAY Sets time of day.
A2H TP_KEYLOCK_TEST Tests if key-lock or keyboard
controller password is on.
(Optional)
A4H TP_KEY_RATE (Optional)
A8H TP_ERASE_F2 Removes “Press F2” prompt from
the screen.
AAH TP_SCAN_FOR_F2 Checks if user has requested
SETUP.
ACH TP_SETUP_CHECK Checks to see if SETUP should be
executed.
AEH TP_CLEAR_BOOT Clears ConfigFailedBit and
InPostBit in CMOS.
B0H TP_ERROR_CHECK Checks for POST errors.
B1H TP_ROMPILOT_UNLOAD (Optional)
B2H TP_POST_DONE Sets/clears status bits to reflect
POST is completed.
B3H TP_ENH_CMOS_STORE Stores enhanced CMOS values in
Non-volatile area. (Optional)
B4H TP_ONE_BEEP (Optional)
B5H TP_QUIETBOOT_END (Optional)
B6H TP_PASSWORD Queries for password before boot.
(Optional)
B7H TP_ACPI Setups ACPI table in shadow RAM