TYAN S5365, Manual

Page: 41 / 79

41
3.3.1 Advanced Chipset Control
This section allows you to fine tune the chipset configuration.
DRAM Data Integrity Mode
If you have ECC memory modules installed, select the correct ECC mode with
this setting.
Disabled / 72-bit ECC / 144-bit ECC / Auto
ECC Error Type
When an ECC error occurs, it generates an interrupt. This feature is used to
select the type of interrupt to report: NMI (on-Maskable); SMI System-
Management); SCI (System Control)
NMI / SMI / SCI / None
SERR signal condition
Select ECC error conditions that SERR# be asserted.
None / Single bit / Multiple bit/ Both
Memory Remap Function
Remaps the memory used by the BIOS (A0000 to FFFF – 384k) above the 1Mb
limit. If enabled, you cannot shadow video and system BIOS.
Disabled / Enabled