TYAN S2933 Manual Download | Manualshive

Page: 31 / 90

background image

http://www.tyan.com

31

2.10 - Installing the Power Supply

There are three power connectors on your Thunder n3600S S2933. The
Thunder S2933 requires that you have an EPS12V power supply that has a 24-
pin, an 8-pin and a 4-pin power connectors. Except the 24-pin and 8-pin power
supplies,

you also need to connect a 4-pin power supply for the power of

South Bridge.

NOTE

: Please be aware that ATX 2.x, ATX12V and ATXGES power supplies

may

not

be

compatible with the board and can damage the motherboard and/or

CPU(s).

24- Pin EPS/12V Power C onnec tor

8-Pin 12V Power Connector

4-P in 12V Power Connector

Applying power to the board

1.  Connect the EPS 12V 8-pin power connector.
2.  Connect the EPS 12V 24-pin power connector.
3.  Connect the EPS 12V 4-pin power connector.
4.  Connect power cable to power supply and power outlet

NOTE

YOU MUST

unplug the power supply before plugging the power cables

to motherboard connectors.

«
...
29
30
31
32
33
...
»

Summary of Contents for S2933



























































































Reviews:

No comments

Related manuals for S2933

TLV320AIC3111 EVM

Brand: Texas Instruments Pages: 39

Brand: Gigabyte Pages: 31

Brand: Sleipner Pages: 28

Brand: Ublox Pages: 38

Brand: Avalue Technology Pages: 82

Brand: Watski Pages: 43

Brand: Evinrude Pages: 76

Brand: ASROCK Pages: 26

Brand: ASROCK Rack Pages: 83

Brand: Atiosys Pages: 1

Brand: Analog Devices Pages: 12

Brand: JETWAY Pages: 46

Brand: Microchip Technology Pages: 30

Brand: Texas Instruments Pages: 24

Freescale MCIMX6Q-SL

Brand: NXP Semiconductors Pages: 37

Brand: Lantronix Pages: 20

Brand: MSI Pages: 76

Brand: DFI Pages: 97

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands