TYAN S2933, Manual

Page: 45 / 90

http://www.tyan.com
45
3.3.4 Super IO Configuration Sub-Menu
You can use this screen to select options for the Super I/O settings. Use the
up and down arrow (
Ç
/
È
) keys to select an item. Use the Plus and Minus (+/-)
keys to change the value of the selected option
BIOS Setup Utility
Main Advanced PCI/PnP Boot Security Chipset Exit
Configure SCH5017 Super IO Chipset
Onboard Floppy Controller
Serial Port1 Address
Chassis Intrusion Detect
Watchdog Mode
[Enabled]
[3F8/IRQ4]
[Disabled]
[Disabled]
Allows BIOS to enable
or disable Floppy
Controller.
← →
Select Screen
↑↓
Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Feature Option Description
Configure SCH5017 Super IO Chipset
Disabled
Onboard Floppy Controller
Enabled
Allow BIOS to enable or disable the
floppy controller.
3F8 IRQ4
3E8 IRQ4
2E8 IRQ3
Serial Port1 Address
Disabled
Allow BIOS to select Serial Port1
Base Addresses.
Disabled
Chassis Intrusion Detect
Enabled
Enable/Disable the function of
chassis intrusion detection. When
chassis open event is detected,
BIOS will record the event.
Disabled
POST
OS
Watchdog Mode
PowerON
POST: BIOS POST Watchdog timer
counting. Start at PowerON. Stop
at OS boot.
OS: OS boot Watchdog. Start at OS
boot.
PowerON: Start at PowerON.
2
4
6
8
10
Watchdog Timer
12
Watchdog timer sets 2/4/6/8/10/12
minutes. When WD time-out occurs,
system will auto reboot.