31
http://www.TYAN.com
3.3 – IDE Configuration
Options related to the IDE controller can be altered through the following.
Onboard PCI IDE
Controller
Both
Primary
Secondary
Leave as Default. This setting toggles the
onboard IDE drive controller on or off.
Primary Master/Slave
Secondary Master/Slave
Auto
Disabled
Leave as Default. This setting toggles the
detection of drives attached to the IDE
controller
Hard Disk Write Protect
Enabled
Disabled
Toggles the use of boot sector protection.
This ensures that no viruses can damage the
hard drive.
ATAPI Detect Time Out
0, 5, 10, 15, 2.0x,
2.5x, 3.0x,
3.5x
Defines how long the system will try to detect
ATAPI devices for.
ATAPI 80pin Cable
Detect
Host & Device
Host
Device
Toggles the detection of 80wire IDE cables.
S-ATA IDE Configuration
Onboard PCI IDE
operate mode
Legacy Mode
Native Mode
Leave as Default.
IDE Configuration
Disabled
P-ATA only
S-ATA only
P-ATA and S-ATA
Select combination you wish to use.
Note only 4 IDE drives can be used at
one time no matter what the
combination.
Combined Mode
operation
Pri. P-ATA
Pri. S-ATA
Select whether SATA or P-ATA will be
your primary hard drive.
SATA ports Definition
P0 Slave/ P1 Master
P1 Slave/ P0 Master