TYAN S2672 User Manual Download Page 50

Page: 50 / 67

Thunder i7525 (S2676)

http://www.tyan.com

Savings
Minimum Power
Savings

[Disabled]
No BIOS-controlled
power management.

[Customized]
User-defined power
management.

[Maximum Power Saving]
Minimum power
consumption.

[Minimum Power Saving]
Maximum power
consumption.

Standby Timeout:

Disabled
2 min
5 min
10 min

15 min

30 min

Time the system is
inactive before entering
Standby mode. In
Standby mode the screen
is dark.

Suspend Timeout:

Disabled

2 min
15 min
30 min
1 h
2 h

Time the system is in
Standby mode before
entering Suspend mode.
In Suspend mode the
CPU is stopped.

APM Resume Timer:

Disabled

Enabled

Resume at a specified
time from Suspend mode.
Valid for non-ACPI
operating systems.

APM Resume Time:

00:00:00

... 23:59:59

Specify the time when the
system is to wake up.
<Tab>, <Shift-Tab> or
<Enter> selects input
fields.

Power-on via LAN:

Enabled

Disabled

Allows the system to be
switched on via a LAN
wakeup.

Power-off via
Keyboard:

Disabled

Enabled

Allows the system to be
switched off via power
button on the keyboard.

Power Failure
Recovery:

Last State

Stay Off

After recovery form power
failure:

Summary of Contents for S2672




































































Search results

Summary of Contents for S2672

Reviews:

Related manuals for S2672

Brands by name

Popular brands

TYAN S2672, User Manual

Search results

Summary of Contents for S2672

Reviews:

Related manuals for S2672

Brands by name

Popular brands