20
NVIDIA RAID User’s Guide
– Version 2.0 A
C
HAPTER
2
Setting Up Your RAID Configuration
3
Use the arrow keys to select the array that you want to set up, then press
Enter.
The
Array Detail
window appears.
Figure 2.9
Array Detail Window
The Array Detail window shows information about the array that you selected, such as
Striping Block used, RAID Mode, Striping Width, Disk Model Name, and disk
capacity.
4
If you want to mark this disk as empty and wipe out all its contents then press
C
.
5
At the prompt, press
Y
to wipe out all the data, otherwise press
N
.
6
Press
Enter
again to go back to the previous window and then press
F10
to exit the
RAID setup.
Now that the RAID setup has been configured from the RAID BIOS, the next step is to
configure and load NVIDIA RAID drivers under Windows, as explained in
“Installing the
NVIDIA RAID Software Under Windows” on page 21
.
Array 2 : NVIDIA MIRROR 74.56G
-
Array
Detail -
[R] Rebuid [D] Delete [C] Clear Disk [Enter] Return
Adapt Channel M/S Index Disk Model Name Capacity
RAID Mode: Mirroring
Striping Width : 1 Striping Block 32K
1 0 Master 0 ST380023AS 74.56GB
1 1 Master 1 ST380023AS 74.56GB
