16
NVIDIA RAID User’s Guide
– Version 2.0 A
C
HAPTER
2
Setting Up Your RAID Configuration
Understanding the Define a New Array Window
Use the Define a New Array window to
• Select the RAID Mode
• Set up the Striping Block
• Specify which disks to use for the RAID Array
Depending on the platform used, the system can have one or more channels. In a
typical system there is usually one adapter and multiple channels, and each channel
has a slave and a master.
The adapter/channel/master/slave status of each hard disk is given in the Loc (location)
columns of the Free Disks and Array Disks lists.
Figure 2.5
Loc Column Information
In
Figure 2.5
, 1.0.M means the hard drive is attached to Adapter 1, Channel 0, and the
drive is set to Master. The following is a list of all possible combinations:
Note:
There is no such thing as Slave drive in Serial ATA. All drives are considered to
be Master since there is a one-to-one connection between the drive and the
adapter.
Parallel ATA
0.0.M
Adapter 0, Channel 0, Master
0.0.S
Adapter 0, Channel 0, Slave
0.1.M
Adapter 0, Channel 1, Master
0.1.S
Adapter 0, Channel 1, Slave
Serial ATA
1.0.M
Adapter 1, Channel 0, Master
1.1.M
Adapter 1, Channel 1, Master
2.0.M
Adapter 2, Channel 0, Master
2.1.M
Adapter 2, Channel 1, Master
1.0.M
M: Master
S: Slave
Channel
Adapter - 0 is used for PATA drives
1 and above is used for SATA drives
